Seagate ST31230N/ND Guia de Instalação descarregar pdf (Página 92)

8-20 Cabling, installing, and configuring the peripheral devices

Installing the remote maintenance terminal and associated modems

Standard 1.0 Option 11 EC Installation and Maintenance Guide November 1999

Setting up a remote

terminal and modem

To install a remote maintenance terminal and modem, follow

these steps.

5 Reconnect the administration terminal to the null

modem adapter and straight-through cable that goes

to the A/B switchbox.

6 Connect the free end of the modem straight-through

cable to the B connector on the A/B switchbox.

7 Plug one end of a phone cord into the phone wall

jack used for dial-in remote maintenance.

8 Plug the other end of the phone cord into the telco

port on the modem.

Step Action

1 Place the terminal and modem in a suitable

location.

2 Connect the keyboard and power cord to the

terminal, and the power cord to the modem.

3 Connect one end of a straight-through RS-232

cable (NTND91AA/AB) to the serial COMM or

COMM1 connector on the terminal. Use a gender

adapter (A0351509) as necessary.

4 Connect the other end of the cable to the modem.

5 Plug the terminal and modem power cords into an

AC receptacle.

6 Power on the terminal and modem.

7 Configure the terminal as described in

“Configuring the administration terminal” on page

8-40.

8 Configure the modem by following the appropriate

procedure under “Configuring local and remote

modems” on page 8-21.

9 Plug one end of a phone cord into the phone wall

jack used for dial-out remote maintenance.

10 Plug the other end of the phone cord into the telco

port on the modem.

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 271 272

Sem comentários

Seagate ST31230N/ND Guia de Instalação Página 92