Seagate ST31230N/ND Guia de Instalação Página 103

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 102
Cabling, installing, and configuring the peripheral devices 8-31
Installing a hospitality system guest administration console
Standard 1.0 Option 11 EC Installation and Maintenance Guide November 1999
Installing a hospitality system guest administration console
Overview
Hotels use Meridian Mail’s Hospitality Voice System (HVS)
option to offer voice messaging service to their staff and
guests. A guest administration console (GAC) is used when
checking guests in and out. In addition, an optional serial
display terminal or serial printer can be connected to the
GAC to display line-by-line output.
HVS operates with a hotels Property Management System
(PMS). This section describes the additional hardware and
software installation procedures required to install a guest
administration console to the EC 11.
Installing a guest
administration
console (GAC)
To install a GAC, perform the following procedure.
Note 1: You must have the Hospitality feature installed.
Note 2: You may have one or two GACs on node 1, and one
GAC on node 2. If node 1 has a MAT, it may have only one
GAC.
Step Action
1 Connect one end of a straight-through cable
(NTND91AA/AB) to an RS-232 port on the EC 11
that has been configured for a GAC. (This could be
one of the last two ports on the Node 1 utility card if
PMSI is used.)
2 Connect the free end of the cable to a null modem
adapter (NTND93AA). Connect the other end of the
null modem adapter to the COMM connector on the
GAC. Use a gender changer as necessary
(A0351509).
3 If an optional display terminal or printer is used,
connect one end of a straight-through RS-232 cable
(NTND91AA/AB) to the printer port of the GAC.
4 Connect the other end of the RS-232 cable to the
COMM port on the display terminal or printer.
5 Configure the GAC terminal as described in
“Configuring the administration terminal” on page 8-
40.
Vista de página 102
1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 271 272

Comentários a estes Manuais

Sem comentários