Seagate ST31230N/ND Guia de Instalação descarregar pdf (Página 37)

Unpacking and inspecting the EC 11 equipment 4-3

Unpacking the equipment

Standard 1.0 Option 11 EC Installation and Maintenance Guide November 1999

Unpacking the equipment

Unpacking

To unpack the EC 11 equipment and optional modules,

follow these steps.

Step Action

1 If the equipment is mounted on a shipping pallet,

follow the instructions provided with the packaging

material and remove the equipment from the pallet.

2 Cut any remaining strapping or tape.

3 Remove the transport protection devices and loosen

any stretch-wrap film (if present) from the equipment.

Retain the packaging material in case any equipment

needs to be returned.

4 Check all items delivered against the order form and

the packing slip. Report any errors or omissions to

your supplier.

5 Remove all hardware components that were shipped

in separate boxes. This could include documentation,

disk and tape units, printed circuit packs, power

supplies, cables, administration terminals, printers,

and spare parts.

6 a. Use a screwdriver to unlock the latches on the

front of the EC 11 cabinet.

b. Slide the latches inward.

c. Swing the cabinet cover down and detach it at the

base. Do not allow the cover to fall to the floor.

d. Remove the cover and put it safely aside.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 271 272

Sem comentários

Seagate ST31230N/ND Guia de Instalação Página 37