Seagate ST31230N/ND Guia de Instalação descarregar pdf (Página 188)

13-22 Starting up and configuring Meridian Mail

Checking out Meridian Mail

Standard 1.0 Option 11 EC Installation and Maintenance Guide November 1999

Checking out Meridian Mail

Checking out

When the system is installed, started up, and configured,

follow these steps before final acceptance testing.

Step Action

1 Check the system status to make sure the channels

are functional and all links are up by pressing the

[System Status] softkey.

Result: Node status should be InService for both

nodes, and DSP port status should be idle for all

voice ports. Prior to reaching the InService state, the

node status and port status should go through a

Loading state while the software loads.

Note: For a full description of this screen, see the

System Administration Guide

(NTP 555-7001-301).

If you power up the system without the network

loops connected, the diagnostics will run and the

software will load, but the channels will time out and

fail, and error messages will appear.

2 If the total number of ports for each node is

incorrect, refer to the “Modify hardware” chapter in

System Administration Tools

(NTP 555-7001-305).

3 If all appears to be OK, press [Exit] to return to the

Logon screen.

4 Log on to the system and change the default

password.

5 Verify that the remote login works by setting the A/B

switch to “Remote” and dialing in. Reset the switch

to “Local.”

6 Examine the General Options screen (selected from

the General Administration menu), and verify that

the customer number is correct.

7 If you have made any changes, restart the system

by powering it down, waiting 10 seconds, then

powering it up.

8 Check the system by adding some mailboxes and

using some Meridian Mail features.

9 Log out.

1 2 ... 183 184 185 186 187 188 189 190 191 192 193 ... 271 272

Sem comentários

Seagate ST31230N/ND Guia de Instalação Página 188