Seagate ST31230N/ND Guia de Instalação descarregar pdf (Página 127)

Installing the EC 11 to Meridian 1 Option 11 switch interface 9-9

Installing the MGate cards

Standard 1.0 Option 11 EC Installation and Maintenance Guide November 1999

Meridian 1 Option 11

hardware

configuration

The MGate card(s) occupy the following positions in the

Meridian 1 Option 11 switch cabinet(s):

26 (second expansion

cabinet)

30 (second expansion

cabinet)

Note that the card slot number is a logical number. The

same card slot number will be used as in the card

portion of the terminal number (TN) when defining

voice ports on the EC 11. The actual physical slots

used are shown in the next table.

4 Use Overlay 22 to print the Configuration Record, and

Overlay 17 to configure the superloop if needed.

5 Insert the card into its assigned slot. The card will run

a self test as follows:

a. Both LEDs (red and green) illuminate.

b. Both LEDs (red and green) flash three times during

the self test.

c. The green LED remains illuminated, and the red

LED extinguishes after successful completion of

the self test.

You should see a message on the Meridian 1

administration console indicating that you have

plugged a card into the slot.

Meridian 1 Option 11 switch

cabinet

MGate card slot in the Option

11 switch cabinet

main cabinet 2, 6, 10

first expansion cabinet 4, 8

second expansion cabinet 2, 6, 10

ATTENTION

All MGate cards must reside in the same Option 11

cabinet and be connected to the EC 11 with NLI cables

of the same length.

1 2 ... 122 123 124 125 126 127 128 129 130 131 132 ... 271 272

Sem comentários

Seagate ST31230N/ND Guia de Instalação Página 127