Seagate ST39103LC Guia do Utilizador descarregar pdf (Página 23)

Chapter 3. SVA Path Operation 13

-L <parameter>

show current device configuration according

to condition(s) defined by setsp command

option parameter(s) (e.g.,

setsp -L -e1

lists all excluded devices;

setsp -L -b0

-f1 lists all devices that have load balancing

disabled and failback enabled);

acceptable parameters are:

-l, -e, -p, -b, -

, -d, and -f

-l{<n>|all}

specify a logical drive for the command,

where;

n is the drive’s spd number ;

all specifies all devices (page 25)

-N

runs a command to change the configuration

files without affecting the running system

(changes will take effect at the next boot)

-n<n>

allocate n buffer pointers for a logical drive,

where

n should be a number approximately

equal to the device’s maximum queue depth.

(pages 24 and 27)

Must be used with

-l.

-p<n>

select primary path n.

Must be used with -l.

-r<n>

set a retry count of n for a logical drive,

where n is the number of times a command

will be retried (pages 24 and 27)

-S

start the spd driver

-T

terminate the spd driver

Table 3-1 setsp Command Options

Option Effect

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 67 68

Comentários a estes Manuais

Sem comentários

Seagate ST39103LC Guia do Utilizador Página 23

Comentários a estes Manuais

Manuais e produtos relacionados com não Seagate ST39103LC