Seagate ST9100A Manual do Utilizador descarregar pdf (Página 35)

show up in Column View.

o ST3816 SATA Device Emulator does not

allow drive partitioning if NCQ is enabled.

o ST3801 SAS Verification: SSD fails 10.1.5

and gets N/A result for 7.4.1 through 7.4.6.

o ST3747 Device Emulator does not keep

serial number on channel D3

o ST3694 Application crashes when "Cancel"

button is pushed when uploading a large,

highly-filtered trace.

o ST3610 Specifying value in DE Field of

Frame dialog causes hang

o ST3561 Target Emulator responds to

Discover command with incorrect SAS

address

o ST3548 Analyzer sometimes misreads

payload length at 6G

o ST3505 Initiator Emulator: Data payload

sent to device from bin file gets corrupted

o ST3488 Device Emulator: "Destroy" SActive

field bits option does not work.

o ST3398 Support 06h DMA DATA SET

MANAGEMENT and TRIM command (ATA 8)

section 7.10

o ST3304 request a SAS Address Pair

Spreadsheet report or view. You can find it in

File menu when text view is open.

o ST3291 HE delay of 10 seconds after

issuing COMRESET

o ST3214 Sierra M6-4 uses Align3 for OOB

instead of Align0

o ST3203 In Target Emulator selecting tag

error on XFER_RDY yields tag error on

Response frame as well

o ST3201 0x4A Get Event/Status Notification

ATAPI command Notification Class Request

and Notification Class fields are confused.

o ST3180 When "Exclude Payload except xx

Dwords" pre-capture filer is used the filtering

is not always consistent

o ST3139 Sierra does not show Host D10.2

during COMINIT sequence

o ST2077 SSP frame format bits in Byte 10

are not decoded as per the SAS2 spec

o ST2058 Need the ability to filter Primitives

from the display.

5.25.

Version 3.71

 This is release 3.71 Build 244 of the SAS/SATA

Protocol Suite™ software.

 This release contains the following components, which

are necessary for the operation of the product:

o SAS Protocol Suite™ Version 3. 71.

o SATA Protocol Suite™ Version 3. 71.

 This release includes the following updates:

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 48 49

Comentários a estes Manuais

Sem comentários